Dashcam Raspberry Zero 2 W Anleitung Mac

Mane123 · 11. August 2023 um 02:27

Du meinst vermutlich Teslausb?

Edit:

Eine aktuelle Anleitung gibt’s da:

marcone/teslausb/blob/main-dev/doc/OneStepSetup.md

# One-step setup

This is a streamlined process for setting up the Pi. You'll flash a preconfigured version of Raspbian Buster Lite and then fill out a config file.

## Notes

- Assumes your Pi has access to Wifi, with internet access (during setup). (But all setup methods do currently.) USB networking is still enabled for troubleshooting or manual setup
- This image will work for either _headless_ (tested) or _manual_ (tested less) setup.
- Currently not tested with the rclone method when using headless setup, however you can specify 'none' as the archive method in the config file, which will configure the pi as a wifi-accessible USB drive, so you can then [configure rclone](./SetupRClone.md) or [configure rsync](./SetupRSync.md) and rerun the setup-teslausb script.

## Configure the SD card before first boot of the Pi

1.  Flash the [latest image release](https://github.com/marcone/teslausb/releases) using [Raspberry Pi Imager](https://www.raspberrypi.com/software/) or a similar flashing tool.

    In Raspberry Pi Imager, you need to click 'Operating System' and then scroll _all the way down_ and select the 'Use custom' option.

1.  Mount the card again, and in the `boot` directory create a `teslausb_setup_variables.conf` file to export the same environment variables normally needed for manual setup (including archive info, Wifi, and push notifications (if desired).
    A sample conf file is located in the `boot` folder on the SD card. The latest sample is also available [from GitHub](https://github.com/marcone/teslausb/blob/main-dev/pi-gen-sources/00-teslausb-tweaks/files/teslausb_setup_variables.conf.sample).
    The sample file contains documentation and suggestions for values.

This file has been truncated. show original